Kapacitor, uzak influxdb düğümü için yapılandırıldığında uyarılar alınamıyor

Question

Kapacitor.conf'un influxdb ayarında url ayarında localhost'u denediğimde, uyarıları düzgün bir şekilde alabiliyorum.

Ancak, URL'yi etki alanı yapılandırması bölümünde uzak bir yere yönlendirmeye çalıştığımda, herhangi bir uyarı alamıyorum.

Bana kimse yardım edebilir mi?

kapacitor.conf dosyası aşağıdaki gibidir:

# The hostname of this node. 
# Must be resolvable by any configured InfluxDB hosts. 
hostname = "localhost" 
# Directory for storing a small amount of metadata about the server. 
data_dir = "/var/lib/kapacitor" 

[http] 
    # HTTP API Server for Kapacitor 
    # This server is always on, 
    # it servers both as a write endpoint 
    # and as the API endpoint for all other 
    # Kapacitor calls. 
    bind-address = ":9092" 
    auth-enabled = false 
    log-enabled = true 
    write-tracing = false 
    pprof-enabled = false 
    https-enabled = false 
    https-certificate = "/etc/ssl/kapacitor.pem" 

[logging] 
    # Destination for logs 
    # Can be a path to a file or 'STDOUT', 'STDERR'. 
    file = "/var/log/kapacitor/kapacitor.log" 
    # Logging level can be one of: 
    # DEBUG, INFO, WARN, ERROR, or OFF 
    level = "INFO" 

[replay] 
    # Where to store replay files, aka recordings. 
    dir = "/var/lib/kapacitor/replay" 

[task] 
    # Where to store the tasks database 
    dir = "/var/lib/kapacitor/tasks" 
    # How often to snapshot running task state. 
    snapshot-interval = "60s" 

[deadman] 
    # Configure a deadman's switch 
    # Globally configure deadman's switches on all stream tasks. 
    # NOTE: for this to be of use you must also globally configure at least one alerting method. 
    global = false 
    # Threshold, if globally configured the alert will be triggered if the throughput in points/interval is <= threshold. 
    threshold = 0.0 
    # Interval, if globally configured the frequency at which to check the throughput. 
    interval = "10s" 
    # Id -- the alert Id, NODE_NAME will be replaced with the name of the node being monitored. 
    id = "node 'NODE_NAME' in task '{{ .TaskName }}'" 
    # The message of the alert. INTERVAL will be replaced by the interval. 
    message = "{{ .ID }} is {{ if eq .Level \"OK\" }}alive{{ else }}dead{{ end }}: {{ index .Fields \"collected\" | printf \"%0.3f\" }} points/INTERVAL." 


# Multiple InfluxDB configurations can be defined. 
# Exactly one must be marked as the default. 
# Each one will be given a name and can be referenced in batch queries and InfluxDBOut nodes. 
[[influxdb]] 
    # Connect to an InfluxDB cluster 
    # Kapacitor can subscribe, query and write to this cluster. 
    # Using InfluxDB is not required and can be disabled. 
    enabled = true 
    default = true 
    name = "localhost" 
    urls = ["http://remote_ip:8086"] 
    #urls = ["http://localhost:8086"] 
    username = "" 
    password = "" 
    timeout = 0 
    # Absolute path to pem encoded CA file. 
    # A CA can be provided without a key/cert pair 
    # ssl-ca = "/etc/kapacitor/ca.pem" 
    # Absolutes paths to pem encoded key and cert files. 
    # ssl-cert = "/etc/kapacitor/cert.pem" 
    # ssl-key = "/etc/kapacitor/key.pem" 

    # Do not verify the TLS/SSL certificate. 
    # This is insecure. 
    insecure-skip-verify = false 

    # Subscriptions use the UDP network protocl. 
    # The following options of for the created UDP listeners for each subscription. 
    # Number of packets to buffer when reading packets off the socket. 
    udp-buffer = 1000 
    # The size in bytes of the OS read buffer for the UDP socket. 
    # A value of 0 indicates use the OS default. 
    udp-read-buffer = 0 

    [influxdb.subscriptions] 
    # Set of databases and retention policies to subscribe to. 
    # If empty will subscribe to all, minus the list in 
    # influxdb.excluded-subscriptions 
    # 
    # Format 
    # db_name = <list of retention policies> 
    # 
    # Example: 
    # my_database = [ "default", "longterm" ] 
    [influxdb.excluded-subscriptions] 
    # Set of databases and retention policies to exclude from the subscriptions. 
    # If influxdb.subscriptions is empty it will subscribe to all 
    # except databases listed here. 
    # 
    # Format 
    # db_name = <list of retention policies> 
    # 
    # Example: 
    # my_database = [ "default", "longterm" ] 

[smtp] 
    # Configure an SMTP email server 
    # Will use TLS and authentication if possible 
    # Only necessary for sending emails from alerts. 
    enabled = false 
    host = "localhost" 
    port = 25 
    username = "" 
    password = "" 
    # From address for outgoing mail 
    from = "" 
    # List of default To addresses. 
    # to = ["oncall@example.com"] 

    # Skip TLS certificate verify when connecting to SMTP server 
    no-verify = false 
    # Close idle connections after timeout 
    idle-timeout = "30s" 

    # If true the all alerts will be sent via Email 
    # without explicity marking them in the TICKscript. 
    global = false 
    # Only applies if global is true. 
    # Sets all alerts in state-changes-only mode, 
    # meaning alerts will only be sent if the alert state changes. 
    state-changes-only = false 

[opsgenie] 
    # Configure OpsGenie with your API key and default routing key. 
    enabled = false 
    # Your OpsGenie API Key. 
    api-key = "" 
    # Default OpsGenie teams, can be overridden per alert. 
    # teams = ["team1", "team2"] 
    # Default OpsGenie recipients, can be overridden per alert. 
    # recipients = ["recipient1", "recipient2"] 
    # The OpsGenie API URL should not need to be changed. 
    url = "https://api.opsgenie.com/v1/json/alert" 
    # The OpsGenie Recovery URL, you can change this 
    # based on which behavior you want a recovery to 
    # trigger (Add Notes, Close Alert, etc.) 
    recovery_url = "https://api.opsgenie.com/v1/json/alert/note" 
    # If true then all alerts will be sent to OpsGenie 
    # without explicity marking them in the TICKscript. 
    # The team and recipients can still be overridden. 
    global = false 

[victorops] 
    # Configure VictorOps with your API key and default routing key. 
    enabled = false 
    # Your VictorOps API Key. 
    api-key = "" 
    # Default VictorOps routing key, can be overridden per alert. 
    routing-key = "" 
    # The VictorOps API URL should not need to be changed. 
    url = "https://alert.victorops.com/integrations/generic/20131114/alert" 
    # If true the all alerts will be sent to VictorOps 
    # without explicity marking them in the TICKscript. 
    # The routing key can still be overridden. 
    global = false 

[pagerduty] 
    # Configure PagerDuty. 
    enabled = false 
    # Your PagerDuty Service Key. 
    service-key = "" 
    # The PagerDuty API URL should not need to be changed. 
    url = "https://events.pagerduty.com/generic/2010-04-15/create_event.json" 
    # If true the all alerts will be sent to PagerDuty 
    # without explicity marking them in the TICKscript. 
    global = false 

[slack] 
    # Configure Slack. 
    enabled = false 
    # The Slack webhook URL, can be obtained by addding 
    # an Incoming Webhook integration. 
    # Visit https://slack.com/services/new/incoming-webhook 
    # to add new webhook for Kapacitor. 
    #url = "test_hook" 
    # Default channel for messages 
    channel = "test-alerts" 
    # If true the all alerts will be sent to Slack 
    # without explicity marking them in the TICKscript. 
    global = false 
    # Only applies if global is true. 
    # Sets all alerts in state-changes-only mode, 
    # meaning alerts will only be sent if the alert state changes. 
    state-changes-only = false 

[hipchat] 
    # Configure HipChat. 
    enabled = false 
    # The HipChat API URL. Replace subdomain with your 
    # HipChat subdomain. 
    url = "https://subdomain.hipchat.com/v2/room" 
    # Visit https://www.hipchat.com/docs/apiv2 
    # for information on obtaining your room id and 
    # authentication token. 
    # Default room for messages 
    room = "" 
    # Default authentication token 
    token = "" 
    # If true then all alerts will be sent to HipChat 
    # without explicitly marking them in the TICKscript. 
    global = false 
    # Only applies if global is true. 
    # Sets all alerts in state-changes-only mode, 
    # meaning alerts will only be sent if the alert state changes. 
    state-changes-only = false 

[alerta] 
    # Configure Alerta. 
    enabled = false 
    # The Alerta URL. 
    url = "" 
    # Default authentication token. 
    token = "" 
    # Default environment. 
    environment = "" 
    # Default origin. 
    origin = "kapacitor" 

[sensu] 
    # Configure Sensu. 
    enabled = false 
    # The Sensu Client host:port address. 
    addr = "sensu-client:3030" 
    # Default JIT source. 
    source = "Kapacitor" 

[reporting] 
    # Send anonymous usage statistics 
    # every 12 hours to Enterprise. 
    enabled = true 
    url = "https://usage.influxdata.com" 

[stats] 
    # Emit internal statistics about Kapacitor. 
    # To consume these stats create a stream task 
    # that selects data from the configured database 
    # and retention policy. 
    # 
    # Example: 
    # stream.from().database('_kapacitor').retentionPolicy('default')... 
    # 
    enabled = true 
    stats-interval = "10s" 
    database = "_kapacitor" 
    retention-policy= "default" 

[udf] 
# Configuration for UDFs (User Defined Functions) 
[udf.functions] 
    # Example go UDF. 
    # First compile example: 
    # go build -o avg_udf ./udf/agent/examples/moving_avg.go 
    # 
    # Use in TICKscript like: 
    # stream.goavg() 
    #   .field('value') 
    #   .size(10) 
    #   .as('m_average') 
    # 
    # uncomment to enable 
    #[udf.functions.goavg] 
    # prog = "./avg_udf" 
    # args = [] 
    # timeout = "10s" 

    # Example python UDF. 
    # Use in TICKscript like: 
    # stream.pyavg() 
    #   .field('value') 
    #   .size(10) 
    #   .as('m_average') 
    # 
    # uncomment to enable 
    #[udf.functions.pyavg] 
    # prog = "/usr/bin/python2" 
    # args = ["-u", "./udf/agent/examples/moving_avg.py"] 
    # timeout = "10s" 
    # [udf.functions.pyavg.env] 
    #  PYTHONPATH = "./udf/agent/py" 

[talk] 
    # Configure Talk. 
    enabled = false 
    # The Talk webhook URL. 
    url = "https://jianliao.com/v2/services/webhook/uuid" 
    # The default authorName. 
    author_name = "Kapacitor" 

################################## 
# Input Methods, same as InfluxDB 
# 

[collectd] 
    enabled = false 
    bind-address = ":25826" 
    database = "collectd" 
    retention-policy = "" 
    batch-size = 1000 
    batch-pending = 5 
    batch-timeout = "10s" 
    typesdb = "/usr/share/collectd/types.db" 

[opentsdb] 
    enabled = false 
    bind-address = ":4242" 
    database = "opentsdb" 
    retention-policy = "" 
    consistency-level = "one" 
    tls-enabled = false 
    certificate = "/etc/ssl/influxdb.pem" 
    batch-size = 1000 
    batch-pending = 5 
    batch-timeout = "1s" 

Answer 1

Benim tahminim: Ana bilgisayar adı InfluxDB örneği tarafından çözülebilir olmalıdır. Yerel sunucudan kapacitor makinenizin ana makine adına/IP adresine geçin.